Kom over dette på Willys forumet. ATF- Aceton skal ihvertfall testes ut neste gang noe skal løsnes.
Machinist's Workshop magazine tested penetrants for break out torque on rusted nuts. They arranged a subjective test of all the popular penetrants with the control being the torque required to remove the nut from a "scientifically rusted" environment. The results are as follows;
Penetrating oil........... Average load
None ...................... 516 pounds
WD-40 .................... 238 pounds
PB Blaster ................ 214 pounds
Liquid Wrench ........... 127 pounds
Kano Kroil ................ 106 pounds
ATF-Acetone mix...........53 pounds
The ATF-Acetone mix was a "home brew" mix of 50-50 automatic transmission fluid and acetone.
Bookmarks